Brake Pad Wear; Other Inspections - Honda CRF450R Fahrerhandbuch Und Wettbewerbsanleitung

Brakes

Brake Pad Wear

Brake pad wear depends on the severity of usage
and track conditions. (Generally, the pads will
wear faster on wet and dirty tracks.) Inspect the
brake pads at each regular maintenance interval
(page 29).
Front Brake Pads
Inspect the brake pads (1) through the front wheel
to determine the brake pad wear. If either brake
pad is worn anywhere to a thickness of 1 mm (0.04
in), both brake pads must be replaced.
minimum thickness
indicator
(3)
(2)
(1)
replace
wear indicator
grooves
(1) brake pads (3) brake disc
(2) front brake caliper
98
Servicing Your Honda
Rear Brake Pads
Inspect the brake pads (1) from the rear side of the
caliper to determine the brake pad wear. If either
brake pad is worn anywhere to a thickness of 1 mm
(0.04 in), both brake pads must be replaced.
1.0 mm
(0.04 in)
(1) brake pads
(2) rear brake caliper
(1)
1.0 mm
(0.04 in)
(2)
minimum thickness
indicator
1.0 mm
(0.04 in)
(1)
replace
(3)
(3) brake disc

Other Inspections

Check that the front brake lever and rear brake
pedal assemblies are positioned properly (page 95)
and the securing bolts are tight.
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.