Honda CRF450R Fahrerhandbuch Und Wettbewerbsanleitung Seite 138

28. Install the handlebar (32), mounting rubbers,
washers and handlebar lower holder nuts (33)
and tighten the handlebar holder nuts to the
specified torque:
44 N·m (4.5 kgf·m, 32 Ibf·ft)
(33)
(32) handlebar
(33) mounting rubbers, washers and handlebar lower
holder nuts
29. Install the number plate (page 109).
30. With the front brake applied, pump the fork up
and down several times to seat the axle and
check front brake operation.
(32)
31. While keeping the forks parallel, alternately
tighten the right axle pinch bolts (34) to the
specified torque:
20 N·m (2.0 kgf·m, 15 Ibf·ft)
(34)
(34) right axle pinch bolts
NOTICE
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the left
fork leg clamp inner surface.
Front Suspension Adjustments
32. Install and tighten the disc cover socket bolt
(35) to the specified torque:
13 N·m (1.3 kgf·m, 10 Ibf·ft)
(35)
(35) disc cover socket bolt
33. Turn the rebound damping (36) and
compression damping (37) adjuster screws
back to their original settings.
(36)
(36) rebound damping adjuster
(37) compression damping adjuster
Adjustments for Competition
(37)
129