Digital Input/Digital Outputs (Optional) (View Of Pins In The Cmd); Installing The "Cmd Assistant" Parameterization Software - HBM CMD Serie Bedienungsanleitung

Starting up
PIN Signal name
no.
1 Digital Out
2 VCC
3 Digital Out
4 Digital In
5 Supply ground
48
8.2.4 Digital input/digital outputs (optional)
(view of pins in the CMD)
2 1
5
3 4
Description
Digital output 1
Supply for digital out­
put 1/2
Digital output 2
Digital input 1
-
8.3 Installing the "CMD Assistant"
parameterization software
Proceed with the installation of the parameterization soft­
ware on your PC as follows:
S Insert the supplied CD into the CD or DVD drive of
your PC.
S Start the program either
- with the installation assistant under "Install CMD
"
Assistant
A2781-3.1 HBM: public
Values
VCC/ 350 mA max.
+18  30 V
VCC/ 350 mA max.
+12  30 V
-
CMD