HBM CMD Serie Bedienungsanleitung Seite 26

Device description
Action
Activation
Inverting circuit logic
Operating mode
Clear peak value memory
Hold signal at analog output
Select parameter set
Action
Activation
Operating mode
Limit value
Overload
Manual mode
Device error
Inverting circuit logic
Action
Operating mode
Parameter set selection
24
Digital input 1
Enables digital input
Relates to the operating mode;
Example: clearing the peak‐value memory in the
event of a High or Low signal
Clear the min. and max. values
Choose between RUN and HOLD
from firmware 3.1, also see Section 7.17, "Parame­
ter sets"
Digital output 1 and 2
Enables digital output
Output active when limit value exceeded
Output active during overload or charge amplifier over­
load
Output can be switched on or off manually
Output active in the event of a device error
Relates to the operating mode
In addition, for digital output 2 only:
Available from firmware 3.1: output is active whilst the
device chooses the parameter set
A2781-3.1 HBM: public
Explanation
Explanation
Explanation
CMD