Checking The Valve Spring; Checking The Cylinder Head; Checking The Valve Guide - Yamaha F115A Wartungshandbuch

POWR
5330
5340
a
VALVES
5350
5360
5370

CHECKING THE VALVE SPRING

1. Measure:
• Free length a
Out of specification → Replace.
Free length limit
52.25 mm (2.057 in)
2. Measure:
• Valve spring tilt a
Out of specification → Replace.
Valve spring tilt limit
IN and EX
2.6 mm (0.10 in)

CHECKING THE CYLINDER HEAD

Measure:
• Cylinder head warpage
Out of specification → Reface or
replace.
Warpage limit
0.1 mm (0.004 in)

CHECKING THE VALVE GUIDE

Measure:
• Valve guide bore a
Out of specification → Replace the
guide.
Valve guide bore
6.005 - 6.018 mm
(0.2364 - 0.2369 in)
Replacement steps
(1) Remove the valve guide with the valve
guide remover/installer.
Valve guide remover
YM-4064-A / 90890-04064
5-29
E
5
5
5