HBM TIM-EC Montageanleitung Seite 92

EtherCAT® data transmission and configuration
90
The value 0 has a special function for the selection. As
soon as the working parameter set is changed, but not
yet saved under a valid parameter number, no parameter
set number will exist for the working parameter set and 0
is then returned.
Bit 7 in the parameter set (locked bit) has the following
function.
Bit 7 signals the EtherCAT
to the parameter selection as it is currently being edited
in the web browser (Ethernet). The measured values con­
tinue to be sent to the EtherCAT
Notice
Editing in the web browser has a real-time effect on the
bus and the measured value.
A3704-4.0 HBM: public
®
master that it has no access
®
bus.
TIM-EC