Supporting Points Approximation - HBM TIM-EC Montageanleitung

Settings
Error in torque or
speed
[static]
or
[dynamic]
Error at overflow
[dynamic]
54
Table of errors in power
Power is a derived quantity. The error flag is set for dynamic
errors of speed or torque (over or underflow, CRC error, no
data reception).
The result from the calculation
P = 2 x Pi x speed x torque is too large for the internal
processor.

10.3.5 Supporting points approximation

Fig. 10.15 Supporting points approximation
A3704-4.0 HBM: public
TIM-EC