HBM TIM-EC Montageanleitung Seite 82

Settings
80
► Select Search to call up File Explorer where you can
select the new firmware file.
► The update starts after pressing the Upload button.
The update can take up to two minutes. The TIM-EC
must not be disconnected from the supply voltage during
the update.
The status LED flashes orange during the update. Once
the update is complete, the status LED is lit green or red.
The TIM­EC automatically initializes itself after a suc­
cessful update. The device must not be disconnected
from the mains.
Tip
Wait about 2 minutes after an update and then press the
F5 key to update the display.
A3704-4.0 HBM: public
TIM-EC