HBM TIM-EC Montageanleitung Seite 59

Example
Measuring range 1:1
Transfer of torque to
low-pass filter 1 (TP1)
TIM-EC
Dual-range - using full and partial range calibration
There are two Supporting points approximations avail­
able. This allows the the torque transducer to be be per­
fectly adjusted and in tune with two different measuring
ranges (full and partial range).
Fig. 10.16 Supporting points approximation for full and partial
range calibration
The filter characteristics selected/set in accordance with
menu item 3.3 Units and filters (or section 10.3.3
"Units/Filter", page 41) from the the above screenshot are
automatically adopted.
A3704-4.0 HBM: public
Measuring range 1:5 / 1:10
Transfer of torque to low-pass
filter 2 (TP2)
Settings
57