3
Scope of delivery
4
Application
TIM-EC
S One TIM-EC torque interface module
S Plug-in terminals for transducer connection and sup
ply voltage (4 in total)
S TIM-EC operating manual
The TIM-EC module receives the digital data flow from
the TMC interface, processes the data and transfers the
measured values (torque, speed, etc.) to the EtherCAT
interface. The same applies to connecting frequency sig
nals. The TIM-EC is set up and parameterized by an inte
grated web server that shows all the parameters in a web
browser via an Ethernet connection. The Ethernet con
nection can be automatically initialized via UPnP. The IP
address is set in the factory to 192.168.1.2.
This state can be restored by pressing and holding the
Reset button for 10 s while turning on the power supply.
A3704-4.0 HBM: public
Scope of delivery
®
11