HBM TIM-EC Montageanleitung Seite 58

Settings
56
After the Save button is pressed, the gradient factor for
clockwise and anticlockwise torque is calculated and dis­
played in the table. Then activate Supporting points
approximation for low-pass filter 1 and/or 2 with ON, or
deactivate this with OFF.
Clockwise torque = positive torque
Anticlockwise torque = negative torque
Example 2
Input interpolation equation
Select the channel to which Supporting points approxima­
tion should be applied, and now select Interpolation
gradient from the Interpolation points equation menu
item. Pressing the Save button adopts the entered gradi­
ent factor. Then activate Supporting points approximation
for low-pass filter 1 and/or 2 with ON, or deactivate it with
OFF.
If you have a calibration certificate for the connected
torque flange, you can take these parameters directly
from the calibration certificate.
Gradient factors
A3704-4.0 HBM: public
TIM-EC