HBM TIM-EC Montageanleitung Seite 50

Settings
Unit
Decimal point
Sign
Low-pass filter 1
(-1 dB)
Low-pass filter 2
(-1 dB)
Unit
Decimal point
Sign
48
Information
If settings are changed in the web browser, this has a
direct influence on the measurement signal. If, for
instance, you change the decimal place for torque, the
data will be immediately sent via the EtherCAT
with the new decimal place.
As the data are transmitted in 32 bit integer format, this
can lead to incorrect measured data interpretation on the
part of the EtherCAT
Standard settings are indicated by underlining.
E.g.: Torque = 310.2Nm
Decimal places = 2 -> EtherCAT
Decimal places = 3 -> EtherCAT
Torque
Nm; kNm; ozfin; ozfft; lbfin; lbfft
.; .0; .00; .000; .0000; .00000
Positive; negative
0.1 Hz ; 1 Hz; 10 Hz; 100 Hz; 1 kHz; 3 kHz; Off
0.1 Hz ; 1 Hz; 10 Hz; 100 Hz; 1 kHz; 3 kHz; Off
Speed
rpm ; rps
.; .0; .00; .000
Positive; negative
A3704-4.0 HBM: public
®
master.
®
value = 31020
®
value = 310200
®
interface
TIM-EC