Parameter Save/Load - HBM TIM-EC Montageanleitung

Settings

10.2.2 Parameter Save/Load

Fig. 10.6 Save and load parameters
You can save and load various settings in 32 parameter
sets in the interface module and reset all settings to the
factory default.
If you need more than 32 parameter sets, they must be
saved as a complete block. All parameter sets ex factory
are flagged to indicate that they have not yet been saved.
®
They cannot therefore be selected via EtherCAT . Only
TIM-EC 35
A3704-4.0 HBM: public