HBM TIM-EC Montageanleitung Seite 73

TIM-EC
10 ±5 kHz = 0 Nm ± nominal (rated) torque
60 ±30 kHz = 0 Nm ± nominal (rated) torque
240 ±120 kHz = 0 Nm ± nominal (rated) torque
The change is implemented by pressing the Save key.
Notice
If measurement devices are connected to the frequency
output, they must be configured to this new output fre­
quency range.
Notice
The analog output on the torque flange cannot be set. It
is 0V ±10 V = 0 Nm ± nominal (rated) torque.
A3704-4.0 HBM: public
Settings
71