Intercommunication - HBM TIM-EC Montageanleitung

Settings
60

10.3.6 Intercommunication

The measured data flow of the T40 stator is made avail­
able on the 10+2 interface. Then it is also available to
other torque interface modules. Then incoming torque
and rotational speed values on the interface modules can
be individually configured and parameterized non- inter­
actively. This setup is useful if the measured values of a
torque transducer will be available in independent net­
works, for example for the control and automation level.
Fig. 10.17 Overview of T40 with TIM-EC modules
This extremely flexible concept also allows a torque
transducer to be used in different fieldbus networks, such
as PROFINET and EtherCAT.
A3704-4.0 HBM: public
TIM-EC