Connection to a PC or network
24
9.2
Restore IP address
1. Press the Reset button on the TIM-EC for about 15
seconds while the power supply is switched on.
2. Open a web browser (e.g. Internet Explorer) and enter
the current IP address, e.g. http://192.168.1.2.
Notice
If DHCP mode has been activated, it will also be reset.
9.3
Activating DHCP
If DHCP (Dynamic Host Configuration Protocol) is sup
ported in a network, it can be activated in TIM-EC. To do
this, open the network settings in Basic Settings ³ Net
work and activate the DHCP client. The default setting is
Off.
A3704-4.0 HBM: public
TIM-EC