HBM TIM-EC Montageanleitung Seite 69

TIM-EC
Information
TMC input mode: All diagnostic functionalities are avail­
able on EtherCAT
"Frequency" input mode: Only the diagnostics error flag
for measured value overflow or underflow ±120% relative
to the nominal (rated) torque is available. No other dia­
gnostic functionalities for torque are available.
In addition, the shunt signals cannot be triggered by the
TIM-EC if the frequency output is used.
Information
Frequency mode is suitable for HBM torque transducers
A3704-4.0 HBM: public
®
, see section 11.
Settings
67