Customer Service - Jungheinrich EFG 213 Betriebsanleitung

5.2

Customer Service

5.2.1 Standard equipment
Brakes
1 Test brakes.
2 Check brake mechanism, adjust and lubricate if necessary.
3 Check magnetic brake air gap.
Electrical system
1 Test displays and controls.
Test warning and safety devices in accordance with operating
2
instructions.
3 Check fuse ratings.
4 Test micro switch and adjust if necessary.
5 Check contactors and/or relays.
6 Carry out a frame leakage test.
7 Test cable and motor attachments.
Check electric wiring for damage [insulation damage, connections].
8
Make sure wire connections are secure.
9 Test Emergency Disconnect switch.
Power Supply
1 Check battery and battery components.
Check battery cable connections are secure, grease terminals if
2
necessary.
3 Check acid density and battery voltage.
Check battery connector for damage, test it and make sure it is
4
secure.
5 Check safety labels are present.
Travel
1 Check transmission for noise and leakage.
Check transmission oil level or grease filling of the transmission and
2
top up if necessary.
3 Check wheel suspension and attachment.
Check the wheels for wear and damage. Make sure they are tight
4
and check the compressed air if necessary.
5 Note: Replace transmission oil after 10000 service hours.
W A B C
t
t
t
W A B C
t
t
t
t
t
t
t
t
t
W A B C
t
t
t
t
t
W A B C
t
t
t
t
173