Decommissioning The Industrial Truck; Prior To Decommissioning; Restoring The Truck To Service After Decommissioning - Jungheinrich AM I20x Betriebsanleitung

5

Decommissioning the Industrial Truck

If the truck is to be out of service for more than a month, it must be stored in a frost-
free and dry room.
5.1

Prior to decommissioning

Procedure
• Thoroughly clean the truck, see page 33.
• Prevent the truck from rolling away accidentally.
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication diagram, see page 37.
5.2

Restoring the truck to service after decommissioning

WARNING!
Faulty brakes can cause accidents
Test the brakes immediately as soon as the truck has been commissioned.
Report any defects immediately to your supervisor.
Tag out and decommission a faulty lift truck.
Only return the truck to service when you have identified and rectified the fault.
Procedure
• Thoroughly clean the truck.
• Lubricate the truck according to the lubrication diagram, see page 37.
• Start up the truck, see page 24.
39