Emergency Disconnect - Jungheinrich EFG 213 Betriebsanleitung

4.5

Emergency Disconnect

CAUTION!
Accident risk
Applying the Emergency Disconnect switch during travel will cause the truck to brake
to a halt at maximum force. This may cause the load to slide off the forks. There is a
higher risk of accidents and injury!
The operation of the Emergency Disconnect button must not be affected by any
objects placed in its way.
Applying the Emergency Disconnect
Procedure
Z
Do not use the Emergency Disconnect (84) as a
service brake.
• Press the Emergency Disconnect (84) down.
All electrical functions are deactivated. The truck
brakes to a halt.
Releasing the Emergency Disconnect
Procedure
• Press the rocker in (s) and pull it up until you feel the Emergency Disconnect (84)
switch engaging.
All electrical functions are enabled and the truck is operational again (assuming the
truck was not operational before the Emergency Disconnect was pressed).
100
84