Jungheinrich EFG 213 Betriebsanleitung Seite 153

Mast emergency lowering
Requirements
– Load handler is not in the rack.
– Turn the Emergency Disconnect switch and key switch off.
– Disconnect the battery.
Tools and Material Required
– Auxiliary tool (174) removed from the document compartment in the backrest of the
truck.
Procedure
• Place the auxiliary tool (174) on the emergency lowering valve (176) with the
recess (177).
• Slowly turn the emergency lowering valve (176) in the forks direction; the mast and
load handler will lower.
• Turn the emergency lowering valve (176) anti-clockwise as far as the stop; the
lowering process stops.
The mast is now lowered.
WARNING!
Only return the truck to service when you have identified and rectified the fault.
150
176
174
177