Replacing The Forks - Jungheinrich EFG 213 Betriebsanleitung

4.10 Replacing the forks

WARNING!
Unsecured forks can cause injury
You can injure your legs when replacing the forks.
Never pull the forks towards your body.
Always push the forks away from your body.
Secure heavy forks with lifting slings and a crane before pushing them down from
the fork carriage.
After replacing the forks fit the retaining bolts (120) and make sure the bolts are
seated correctly. Retaining bolt torque: 85 Nm.
Replacing the forks
Requirements
– Load handler lowered and forks not touching
the ground.
Procedure
• Disassemble the retaining bolts (120).
• Loosen the fork stop (119).
• Carefully push the forks off the fork carriage.
The forks are now dismantled from the fork
carriage and can be replaced.
106
119
120