Aquamatic/Bfs Iii Water Refilling System - Jungheinrich EFG 213 Betriebsanleitung

Aquamatic/BFS III water refilling system for Jungheinrich traction battery with
EPzS and EPzB cells with tubular positive plates
Aquamatic plug arrangement for the Operating Instructions
EPzS
2/120 – 10/ 600
2/160 – 10/ 800
–
–
–
–
–
–
–
2/180 – 10/900
2/210 – 10/1050
2/230 – 10/1150
2/250 – 10/1250
2/280 – 10/1400
2/310 – 10/1550
* The cell series comprise cells with two to ten (twelve) positive plates, e.g. column
EPzS. 2/120 - 10/600.
These are cells with the positive plate 60Ah. The type designation of a cell is e.g.
2 EPzS 120.
Non-adherence to the operating instructions, repairs carried out with non-original
spare parts, unauthorised interference, and the use of additives for the electrolytes
(alleged improvement agents) will invalidate any claim for warranty.
When using batteries which comply with
structions on maintaining the respective protection class during operation (see asso-
ciated certification).
8
Cell series*
EPzB
2/ 42 – 12/ 252
2/ 64 – 12/ 384
2/ 84 – 12/ 504
2/110 – 12/ 660
2/130 – 12/ 780
2/150 – 12/ 900
2/172 – 12/1032
2/200 – 12/1200
2/216 – 12/1296
–
–
–
–
–
–
Aquamatic plug with
diagnostics hole
Aquamatic plug type
Frötek
(yellow)
50,5 mm
50,5 mm
50,5 mm
50,5 mm
50,5 mm
50,5 mm
50,5 mm
56,0 mm
56,0 mm
61,0 mm
61,0 mm
61,0 mm
61,0 mm
72,0 mm
72,0 mm
Aquamatic plug BFS III with
diagnostics hole
I and II, it is important to follow the in-
(length)
BFS
(black)
51,0 mm
51,0 mm
51,0 mm
51,0 mm
51,0 mm
51,0 mm
51,0 mm
56,0 mm
56,0 mm
61,0 mm
61,0 mm
61,0 mm
61,0 mm
66,0 mm
66,0 mm