Checking The Wheel Attachments - Jungheinrich EFG 213 Betriebsanleitung

7.3

Checking the wheel attachments.

WARNING!
Using different tyres can cause accidents
The quality of tyres affects the stability and performance of the truck.
The diameter of the wheels must differ by no more than 15 mm.
Always replace tyres in pairs. After replacing the tyres check the wheel nuts are
secure after 10 service hours.
Always use tyres of the same make, model and profile.
Checking the wheel attachment
Requirements
– Prepare the truck for maintenance and repairs
((see "Preparing the truck for maintenance and
repairs" on page 187)).
Tools and Material Required
– Torque wrench
Procedure
• Torque the wheel nuts (179) crosswise with a
torque wrench, for torques (see "Tyre type" on page 29).
The wheel attachment is now checked.
Z
When using pneumatic tyres check the air pressure, for the air pressure (see "Tyre
type" on page 29)
188
179