Customer Service - Jungheinrich EFG 113 Betriebsanleitung

4.2

Customer service

4.2.1 Standard equipment
Brakes
1 Test brakes.
2 Check brake lining.
Check the brake fluid level in the compensation tank and top up if
3
necessary.
4 Check brake mechanism, adjust and lubricate if necessary.
5 Check water component of brake fluid and replace if necessary.
Electrical System
1 Test displays and controls.
Test warning and safety devices in accordance with operating
2
instructions.
3 Check fuse ratings.
4 Test micro switch and adjust if necessary.
5 Check contactors and/or relays.
6 Carry out a frame leakage test.
7 Test cable and motor attachments.
Check electric wiring for damage [insulation damage, connections].
8
Make sure wire connections are secure.
9 Test Emergency Disconnect switch.
Power Supply
1 Check battery and battery components.
Check battery cable connections are secure, grease terminals if
2
necessary.
3 Check acid density and battery voltage.
Check battery connector for damage, test it and make sure it is
4
secure.
Travel
1 Check the transmission for noise and leakage.
Check transmission oil level or grease filling of the transmission and
2
top up if necessary.
3 Check wheel suspension and attachment.
4 Replace transmission oil.
Check the wheels for wear and damage. Make sure they are tight
5
and check the compressed air if necessary.
W A B C
t
t
t
t
t
W A B C
t
t
t
t
t
t
t
t
t
W A B C
t
t
t
t
W A B C
t
t
t
t
t
121