Jungheinrich EFG 213 Betriebsanleitung Seite 64

Battery installation
Procedure
•
• Drive the EJE pallet truck and battery to the
truck.
• Deposit the battery replacement trolley with
the rollers (65) on the rails of the truck base.
• Lower the forks of the EJE pallet truck until the
battery is horizontal.
• Align the heights and push the forks of the EJE
pallet truck underneath the truck base.
NOTE
Risk of material damage
Inserting the battery can cause material
damage to the truck chassis.
Lower the forks and avoid striking the
top or bottom parts of the chassis when
inserting the battery.
• Insert the battery in the truck.
• Close the battery lock (63).
•
• Undo the safety catch (55).
• To do this press the pedals (56).
• Move the EJE pallet truck away from the truck.
• Close the battery door.
The battery is now inserted.
63
55 56
65
61