Removal And Installation Using A Roller Conveyor (O) - Jungheinrich EFG 213 Betriebsanleitung

5.7

Removal and installation using a roller conveyor (o)

CAUTION!
Trapping hazard
Trapping hazard when replacing the battery.
When replacing the battery do not reach between the battery and the chassis.
Wear safety shoes.
Battery removal and installation
Requirements
– Park the truck securely, (see "Parking the truck securely" on page 99).
– Battery exposed, (see "Exposing the battery" on page 50).
– Battery disconnected.
– Battery lock released.
Tools and Material Required
– External roller guided replacement device
Procedure
Z
•
Note the replacement device manufacturer's
instructions.
• Bring the external replacement device up to
the truck.
•
• Pull the battery out with the external
replacement device
and transport it to the charging station
for charging.
• Deposit the battery securely.
The battery is now removed.
Z
Battery assembly is the reverse order.
WARNING!
After inserting the battery close the battery lock.
71