Jungheinrich EFG 213 Betriebsanleitung Seite 168

Electrical optional equipment
Electrical system
1 Test the electrical optional equipment and check for damage.
Electrolyte recirculation
Power Supply
1 Replace air filter wadding.
2 Check hose connections and test the pump.
Overhead guard cover
Chassis and superstructure
Check overhead guard cover is present, check for damage and
1
make sure it is secure.
Fire extinguisher
Agreed performance levels
1 Check fire extinguisher is present, secure and Check test interval.
Belt lock control
Chassis and superstructure
1 Test the belt lock control and check for damage.
Heating
Chassis and superstructure
1 Test the heating.
2 Check heating vent filter for contamination and clean if necessary.
Clamping device
Hydraulic operations
1 Attachment: clean and lubricate.
2 Check hydraulic ports and tighten if necessary.
3 Check axial play of the front and rear rollers and adjust if necessary.
4 Check sliding blocks are complete.
5 Check cylinder seals.
W A B C
t
W A B C
t
t
W A B C
t
W A B C
t
W A B C
t
W A B C
t
t
W A B C
t
t
t
t
t
165