Heating; Adding Window Washer System Fluid - Jungheinrich EFG 213 Betriebsanleitung

7.6

Heating

Replacing the air conditioning filter
Requirements
– Filter contaminated
Procedure
• Loosen the screws (158).
• Remove the panel (159).
• Replace the filter.
• Attach the panel (159).
• Tighten the screws (158).
The filter cassette is now replaced.
Z
Regular servicing is required to ensure the heating can work at a consistently high
level, (see "Maintenance checklist EFG 213-220" on page 158) or (see
"Maintenance checklist EFG 316-320" on page 170).
7.7

Adding window washer system fluid

Procedure
• Make sure there is sufficient window fluid in
the container (186).
• If necessary top up with anti-freeze.
158
186
158
159
193