5.1
Battery holder assembly
CAUTION!
The battery holder can only be fitted to Jungheinrich AG pallet trucks (EJE) or
hand pallet trucks with notice signs.
Requirements
– EJE or hand pallet truck available with holes in accordance with assembly
instructions, (see "Assembly instructions" on page 58).
Procedure
• Open the safety catch (55).
• To do this press the pedals (56).
• Insert bent pins (57) into the forks of the EJE
or hand pallet truck.
• Push the battery holder down and fit the
bolts (58) in the holes.
• Close the safety catch (55).
• To do this press the pedals (56).
• Secure the locking plate (59) against theft with
4 screws (o).
55
56
57
58
59
57