Heating - Jungheinrich EFG 213 Betriebsanleitung

6.9

Heating

Item
154
155
156
157
Heating operation
Procedure
• Press the switch (157) to switch on the fan.
• Set the nozzles (154,155) to the required position.
• Turn the temperature controller (156) to the right to increase the cab temperature.
• Turn the temperature controller (156) to the left to decrease the cab temperature.
Z
Regular servicing is required to ensure the heating can work at a consistently high
level, (see "Maintenance checklist EFG 213-220" on page 158) or (see
"Maintenance checklist EFG 316-320" on page 170).
Replacing the air conditioning filter
Requirements
– Filter contaminated
Procedure
• Loosen the screws (158).
• Remove the panel (159).
• Replace the filter.
• Attach the panel (159).
• Tighten the screws (158).
The filter cassette is now replaced.
138
Designation
Body / window nozzles
Foot compartment jet
Temperature controller
Fan settings
154
155
156
157
158
159
158