Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information; General Information; Before Commissioning - Reely Piper J3 Cub Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Piper J3 Cub:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.

Safety Information

In case of damage caused by non-compliance with these operating instructions, the warran-ty/gua-
rantee will expire. We do not assume any liability for consequential damage!
We do not assume any liability for damage to property or personal injury caused by improper use or
the failure to observe the safety instructions! In such cases the warranty/guarantee will expire.
Normal wear and tear and accident and crash damage (e.g. broken rotor or other broken parts) are also
excluded from the guarantee and warranty.
Dear Customer,
this safety information serves not only to protect the product, but also your own safety and the safety of other
persons. Therefore, read this chapter very carefully before taking the product into operation!
a) General Information
Caution, important note!
Operating the model may cause damage to property and/or individuals. Therefore, make sure that you are
sufficiently insured when using the model, e.g. by taking out private liability insurance. If you already have
private liability insurance, verify whether or not operation of the model is covered by your insurance before
commissioning your model.
Note: In some EU countries, you are required to have insurance for any flying models!
• The unauthorized conversion and/or modification of the product or its components is inadmissible for safety re-
asons.
• This product is not a toy and not suitable for children under 14 years of age.
• The product must not become damp or wet.
• If you do not have sufficient knowledge yet of how to operate remote-controlled models, please contact an experi-
enced model sportsman or a model construction club.
• Do not leave any packaging material unattended. It may become a dangerous playing material for children.
• Should questions arise that are not answered by these operating instructions, contact us (for contact information,
see chapter 1) or another expert.
b) Before Commissioning
• Make sure that no other models are operated on the same channel (only at 35/40 MHz remote controls) within the
range of the remote control. Otherwise, you will lose control of the remote-controlled models! Always use different
channels if you wish to operate two or several models in direct proximity of each other simultaneously.
For 2.4 GHz remote controls, it must also be tested whether the concurrent operation of several remote controls is
possible without interference.
• Regularly check the functional safety of your model and of the remote control system. Watch out for any visible
damage such as defective plug connections or damaged cables. All moving parts of the model must run smoothly
but should not have any play in their bearings.
31

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis