Height Adjustment Of The Elevating Avantgarde Vr And Xxl 2 Footrests; Angle Adjustment Of The Elevating Avantgarde Vr And Xxl 2 Footrests - Otto Bock Avantgarde series Bedienungsanleitung

Height Adjustment of the Elevating Avantgarde
VR and XXL 2 Footrests
By loosening the screw at the footrest bar (Fig. 78), the footplate can be adjusted according to
your specific lower leg length and to the seat cushion you use.
There are five threaded holes in the footrest bar, it therefore may be necessary to
completely remove the screw and use another hole to achieve the desired footrest
height.
Ensure to firmly re-tighten all screws and nuts after making adjustments.
The legrests can be adjusted within the range from 1° to 90°. Pull the footrests upward until
they have reached the desired position. The legrests automatically lock in place. To reposition the
legrests relieve the load on the footrests and press the release lever (Fig. 79, item a) downward
to lower the legrests. Bring the legrests to the desired position.
Make sure to always secure the legrests with your hand against uncontrolled
falling downward when lowering it.
82
78
Angle Adjustment of the Elevating Avantgarde VR
and XXL 2 Footrests
a
79