Electric Back Angle Adjustment Of The Standard Seat - Otto Bock B 600 Bedienungsanleitung

12.6

Electric Back Angle Adjustment of the Standard Seat

It is possible to equip the standard seat with an electric back angle adjustment
(fig. 30).
To obtain a low folding height for transport, release the cross bolt at the lower end of
the drive unit by pushing the lever upward (fig. 31). Remove the side panels and fold
down the back part onto the seat bottom. For unfolding, unfold the back and press the
drive unit onto the lock to engage the bolt.
B600 – Instructions for Use
Attention!
Be particularly careful when driving on inclines with the back
inclined to the rear, because the stability against tipping is
reduced!
Fig. 30: Back angle adjustment
Fig. 31: Release bolt for back angle adjustment
Options
83