Piston And Connecting Rod - Takeuchi Tb014 Werkstatt-Handbuch

SM-E2B SERIES, WSM

(6) Piston and Connecting Rod

Connecting Rod
1. Remove the connecting rod caps (1) using a bihexagonal
8 mm socket.
(When reassembling)
A Align the marks (a) with each other. (Face the marks toward
the injection pump.)
A Apply engine oil to the connecting rod screws and lightly screw
it in by hand, then tighten it to the specified torque.
If the connecting rod screw won't be screwed in smoothly,
clean the threads.
If the connecting rod screw is still hard to screw in, replace it.
Tightening torque Connecting rod screw
(1) Connecting Rod Cap
S-45
DIESEL ENGINE
26.5 to 30.4
2.7 to 3.1
19.5 to 22.4 ft-lbs
(a) Mark
0000003200E