Takeuchi TB014 Werkstatt-Handbuch Seite 356

SM-E2B SERIES, WSM
Connecting Rod Alignment Tool
Code No : 07909-31661
Application : Use to check the connecting rod alignment.
Applicable : Connecting rod big end I.D.
range 30 to 75 mm (1.18 to 2.95 in.) dia.
Connecting rod length
65 to 300 mm (2.56 to 11.81 in.)
Nozzle Tester
Code No : 07909-31361
Application : Use to check the fuel injection pressure and spray
pattern of nozzle.
Measuring : 0 to 50 MPa
range (0 to 500
Plastigage
Code No : 07909-30241
Application : Use to check the oil clearance between
crankshaft and bearing, etc..
Measuring : Green.....0.025 to 0.076 mm (0.001 to 0.003 in.)
range Red.........0.051 to 0.152 mm (0.002 to 0.006 in.)
Blue.........0.102 to 0.229 mm (0.004 to 0.009 in.)
Red Check
Code No : 07909-31371
Application : Use to check cracks on cylinder head, cylinder
block, etc..
G-19
GENERAL
0000000684E
, 0 to 7000 psi)
0000000685E
0000000686E
0000000687E