Takeuchi TB014 Werkstatt-Handbuch Seite 359

SM-E2B SERIES, WSM
Flywheel Stopper
Application : Use to loosen and tighten the flywheel screw.
A 200 mm (7.87 in.)
B 20 mm (0.79 in.)
C 30 mm (1.18 in.)
D 8 mm (0.31 in.)
E 10 mm dia. (0.39 in. dia.)
Crankshaft Bearing 1 Replacing Tool
Application : Use to press out and press fit the crankshaft
bearing 1.
[Press Out]
A 135 mm (5.31 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 10 mm (0.39 in.)
E 22 mm (0.87 in.)
F 20 mm dia. (0.79 in. dia.)
G 47.90 to 47.95 mm dia. (1.8858 to 1.8878 in. dia.)
H 43.90 to 43.95 mm dia. (1.7283 to 1.7303 in. dia.)
[Press Fit] for Z482/D662/D722/D782-E2B
A 130 mm (5.12 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 9 mm (0.35 in.)
E 24 mm (0.95 in.)
F 20 mm dia. (0.79 in. dia.)
G 68 mm dia. (2.68 in. dia.)
H 39.90 to 39.95 mm dia. (1.5709 to 1.5728 in. dia.)
[Press Fit] for Z602/D902-E2B
A 130 mm (5.12 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 9 mm (0.35 in.)
E 24 mm (0.95 in.)
F 20 mm dia. (0.79 in. dia.)
G 68 mm dia. (2.68 in. dia.)
H 43.90 to 43.95 mm dia. (1.7283 to 1.7303 in. dia.)
G-22
GENERAL
0000000818E
00000008676E