4.4.2 Disassembly procedure:
Disassemble in the order of the numbers in the illustration.
1)Perform steps 1) to 15) in the cylinder head disassembly procedure.
2)Perform steps 1) to 12) in the gear train disassembly procedure.
3)Remove the oil pan and the spacer. (See Point 1 of 4.4.6)
4)Remove the lube oil suction pipe.
5)Remove the piston w/rod. (See Point 2 of 4.4.6)
6)Remove the mounting flange. (See Point 3 of 4.4.6)
7)Remove the bearing metal caps. (See Point 4 of 4.4.6)
8)Remove the crankshaft. (See Point 5 of 4.4.6)
9)Remove the tappets.
10)Remove the rings from the piston. (See Point 6 of 4.4.6)
11)Remove the oil seal from the flywheel housing. (See 4.4.8)
4.4.3 Reassembly procedure:
Reverse of the disassembly procedure.
4. Disassembly, inspection and reassembly of engines
74