Tension Adjustment - Takeuchi TB014 Werkstatt-Handbuch

2)If necessary, adjust the V-belt tension (deflection).
To adjust the V-belt tension, loosen the set bolt and
move the alternator to tighten the V-belt.
3)After replacing with a new V-belt and adjusting it, run
the engine for 5 minutes and readjust the deflection
to the value in the table above.
4)Visually check the V-belt for cracks, oiliness or wear.
If any, replace the V-belt with new one.
Adjuster
Alternator

Tension adjustment

21
2. Inspection and adjustment
Adjust the V-belt tension
inserting a bar