Safety Working - Takeuchi TB014 Werkstatt-Handbuch

SM-E2B SERIES, WSM
SAFETY STARTING
A Do not start the engine by shorting across starter
terminals or bypassing the safety start switch.
A Unauthorized modifications to the engine may impair
the function and / or safety and affect engine life.

SAFETY WORKING

A Do not work on the machine while under the
influence of alcohol, medication, or other substances
or while fatigued.
A Wear close fitting clothing and safety equipment
appropriate to the job.
A Use tools appropriate to the work. Makeshift tools,
parts, and procedures are not recommended.
A When servicing is performed together by two or
more persons, take care to perform all work safely.
A Do not touch the rotating or hot parts while the
engine is running.
A Never remove the radiator cap while the engine is
running, or immediately after stopping. Otherwise,
hot water will spout out from radiator. Only remove
radiator cap when cool enough to touch with bare
hands. Slowly loosen the cap to first stop to relieve
pressure before removing completely.
A Escaping fluid (fuel or hydraulic oil) under pressure
can penetrate the skin causing serious injury.
Relieve pressure before disconnecting hydraulic or
fuel lines. Tighten all connections before applying
pressure.
A Wear a suitable hearing protective device such as
earmuffs or earplugs to protect against objectionable
or uncomfortable loud noises.
2
SAFETY INSTRUCTIONS
0000001388E
0000001389E