Disassembling And Assembling; Draining Coolant And Engine Oil - Takeuchi TB014 Werkstatt-Handbuch

SM-E2B SERIES, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Draining Coolant and Engine Oil

Draining Coolant
A Never remove radiator cap while operating or immediately
after stopping. Otherwise, hot water will spout out from
the radiator. Wait for more than ten minutes to cool the
radiator, before opening the cap.
1. Prepare a bucket. Open the coolant drain cock.
(1) Coolant Drain Cock
Draining Engine Oil
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. Remove the drain plug (1) to drain oil.
4. After draining, screw in the drain plug.
(When refilling)
A Fill the engine oil up to the upper line on the dipstick (2)
A Never mix two different type of oil.
A Use the proper SAE Engine Oil according to ambient
temperature.
(1) Drain Plug
(2) Dipstick
S-31
DIESEL ENGINE
0000001290E
(3) Oil Inlet Plug
0000001291E