Thermostat - Takeuchi TB014 Werkstatt-Handbuch

SM-E2B SERIES, WSM

(4) Thermostat

Thermostat Assembly
1. Remove the thermostat cover mounting screws (1), and
remove the thermostat cover (2).
2. Remove the thermostat assembly (4).
(When reassembling)
A Apply a liquid gasket (Three Bond 1215 or equivalent) only at
the thermostat cover side of the gasket (3).
(1) Thermostat Cover Mounting
Screw
(2) Thermostat Cover
Water Pump Assembly
1. Loosen the alternator mounting screws, and remove the fan
belt.
2. Remove the fan and fan pulley.
3. Remove the water pump assembly from the gear case cover.
4. Remove the water pump flange (1).
5. Press out the water pump shaft (2) with the impeller (6) on it.
6. Remove the impeller from the water pump shaft.
7. Remove the mechanical seal (5).
(When reassembling)
A Apply a liquid gasket (Three Bond 1215 or equivalent) to the
both sides of gasket (4).
A Replace the mechanical seal with new one.
(1) Water Pump Flange
(2) Water Pump Shaft
(3) Water Pump Body
S-37
DIESEL ENGINE
(3) Thermostat Cover Gasket
(4) Thermostat Assembly
0000001357E
(4) Water Pump Gasket
(5) Mechanical Seal
(6) Impeller
0000001358E