LORCH HandyTIG 180 AC/DC ControlPro Bedienungshandbuch Seite 41

UKCA-Declaration of Conformity
17 Care and maintenance
Please heed the current safety and accident
prevention regulations during all mainte-
nance and repair work.
The machine requires a minimum of care and mainte-nance.
Only a few items need to be checked to ensure trouble-free
long-term operation.
 Check regularly for damage:
– Mains plug and cable
– Welding torch and connections
– Ground cable and connection
 Check the dust filter every two months.
– Switch the machine off
– Unplug the mains plug
– Unscrew the ventilation grid on the rear side
– Check the dust filter for pollution
– Replace the dust filter if it is polluted (dust filter: order
number 612.5192.0)
Use only original Lorch spare parts for mainte-
nance and repair.
If you experience problems or need repairs,
contact a dealer authorised by Lorch. Never
make repairs or technical changes yourself. In
this case the manufac-turer's warranty is no
longer valid.
18 Disposal
Only for EU countries.
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU on waste,
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached
the end of their service life must be collected separately and
returned to an environmentally compatible recycling facility.
01.22
19 Service
Lorch Schweißtechnik GmbH
Im Anwänder 24-26
71549 Auenwald
Germany
Tel. +49 7191 503-0
Fax +49 7191 503-199
Lorch Information Support Assistent:
www.lorch.eu/manuals
Here you can obtain further technical documentation, circuit
diagrams and spare parts lists for your product.
20 UKCA-Declaration of Conformity
We hereby declare that this product was manufactured in con-
formance with the following standards or official docu ments:
EN IEC 60974-1:2018, EN IEC 60974-1:2018/A1:2019, EN IEC
60974-2:2019, EN IEC 60974-3:2019, EN 60974-10:2014 CL.A in
conformance with the guidelines SI 2016 No. 1101, SI 2016 No.
1091, SI 2012 No. 3032, SI 2016 No. 838
UK Representative: Lorch Schweisstechnik Ltd Huntington
WS12 4TR Cannock / Staffordshire
Wolfgang Grüb
Director
Lorch Schweißtechnik GmbH
909.1869.9-07 - 41 -