E) Model Type Selection „Mdl Type - Reely HCP80 Bedienungsanleitung

e) Model Type Selection „MDL TYPE"
As there are different functions available for each of the respective model types (e.g. mixers or switching functions),
it is necessary to enter the right model type during programming of the remote control transmitter. You can choose
between plane models „ACRO" and different helicopter models with different swash plate linkages.
Important!
For the helicopter model „HCP80", the linkage „3 Servos 120" must be set!
Proceed as follows to select the model type:
• Call the system settings menu.
• Select the menu item „MDL TYPE" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the currently called model memory and
the model type with the associated figure is displayed.
• Pushing the buttons „INC (+)" and „DEC (-)" permits selec-
tion of the required model type (Heligrafik) and linkage of the
swash plate („3 Servos 120"). The setting is saved automati-
cally.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the system setting menu.
92
Figure 27