M) Servo Control „Monitor - Reely HCP80 Bedienungsanleitung

m) Servo Control „MONITOR"
In this menu you can graphically display the servo control settings for all 6 channels and simultaneously check the
individual control functions with all mixers. Especially with helicopter models you can easily very quickly make mixer
errors for swash plate control.
Proceed as follows to display the servo control:
• Call the function settings menu.
• Select the menu item „MONITOR ADJ" with the buttons „UP"
or „DOWN".
• Activate the menu item with the button „SELECT".
The display shows the 6 channels in the current position of
the encoders.
If you move the control sticks, activated switches or toggle
switches in different directions now, you will see precisely
which servo is deflected in which direction.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the function setting menu.
112
Figure 48