G) Calibrate Pitch Stick Centre Position „Stk Adj - Reely HCP80 Bedienungsanleitung

g) Calibrate Pitch Stick Centre Position „STK ADJ"
The remote control offers the option of electronically calibrating the mechanical middle position of the pitch control
stick. Then the mechanical and electronic middle positions match precisely.
To calibrate the pitch control stick, proceed as follows:
• Call the system settings menu.
• Select the menu item „STK ADJ" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the safety prompt asking if you want to
calibrate the control stick.
• Push the pitch control stick into the precise middle position.
• Push the two buttons „INC (+)" and „DEC (-)" at the same
time.
• Successful calibration is displayed by the message „SET OK".
• Push the pitch control stick back to the bottom position.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the system setting menu.
Figure 30
95