F) Control Stick Assignment „Stk Type - Reely HCP80 Bedienungsanleitung

f) Control Stick Assignment „STK TYPE"
As already described in the general information on control of model helicopters, the model helicopter „HCP80" is cont-
rolled with the two control sticks. Which control stick assumes which function can be set individually at the transmitter.
All in all, four different stick modes are available:
Mode 1:
Right control stick forward/backward: Pitch function (3)
Right control stick left/right: Roll function (1)
Left control stick forward/backward: Nod function (2)
Left control stick left/right: Tail function (4)
Mode 2 (Factory Settings):
Right control stick forward/backward: Nod function (2)
Right control stick left/right: Roll function (1)
Left control stick forward/backward: Pitch function (3)
Left control stick left/right: Tail function (4)
Mode 3:
Right control stick forward/backward: Pitch function (3)
Right control stick left/right: Tail function (4)
Left control stick forward/backward: Nod function (2)
Left control stick left/right: Roll function (1)
Mode 4:
Right control stick forward/backward: Nod function (2)
Right control stick left/right: Tail function (4)
Left control stick forward/backward: Pitch function (3)
Left control stick left/right: Roll function (1)
The transmitter is delivered in mode 2 ex works. If
you want to operate the transmitter in mode 1 or 3,
the control sticks must be mechanically converted
according to the instructions in chapter 10.
Figure 28
93