Reely HCP80 Bedienungsanleitung Seite 94

To set the desired control stick assignment, proceed as follows:
• Call the system settings menu.
• Select the menu item „STK TYPE" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the currently set control stick assign-
ment.
• Pushing the buttons „INC (+)" and „DEC (-)" sets the descri-
bed control stick assignment (modes 1...4). The setting is
saved automatically.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the system setting menu.
94
Figure 29