Programming The Remote Control - Reely HCP80 Bedienungsanleitung

12.

Programming the Remote Control

The remote control is pre-set for the helicopter „HCP80" in the factory. Nevertheless, you can individually adjust the
control behaviour of your model helicopter to your control habits. To receive the original data, we recommend that you
copy the model memory used ex works and to only make changes in the copied model memory.
For the best adjustment to your model, your remote control offers different setting menus: In the system setting menu
„SYSTEM", the general basic parameters are set or selected. Then the parameters referring to the respective model
type are entered in the function setting menu „Function".
The settings are made with six buttons that have the following functions:
„INC (+)" button (8)
This button increases or reduces the value of the setting called. Pushing and holding the button leads to quick chan-
ging of the setting values.
„DEC (-)" button (9)
This button reduces or changes the value of the setting called. Pushing and holding the button leads to quick changing
of the setting values.
„CLEAR" button (10)
This button sets changed values back to the factory settings.
„SELECT" button (12)
With this button, you can confirm or call the selected menu item.
„DOWN" button (13)
With this button, you can move down within the menu structure.
„UP" button (14)
With this button, you can move up within the menu structure.
Even though the remote control is designed for many model helicopter types and for plane models as well,
these operating instructions only explain the settings relevant for the „HCP80".
86
Figure 21