B) Model Memory Selection „Mdl Sel - Reely HCP80 Bedienungsanleitung

b) Model Memory Selection „MDL SEL"
The remote control system has 10 model memories which allow you to save the data for your respective models
independently of one another. Therefore, it is required to set the associated model memory in the transmitter before
operating a specific model.
To select one of the 10 model memories, proceeded as follows:
• Call the system settings menu.
• Select the menu item „MDL SEL" with the buttons „UP" or
„DOWN".
• Activate the menu item with the button „SELECT".
The display shows the currently called model memory, the
modulation type and the model type and the model name.
• Pushing the buttons „INC (+)" and „DEC (-)" sets the descri-
bed model memory. The setting is saved automatically.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the system setting menu.
• Return to the operating display and check if the desired mo-
del memory is active.
Nach dem Einschalten der Fernsteuerung wird immer
der zuletzt eingestellte Modellspeicher aufgerufen.
Figure 24
89